{"title":"Awning Accessories","description":"\u003cp\u003eAdd-ons for Rainger Duo 270 and 180 awnings: ratchet tie-down ropes, the laser-cut rope hook bracket that bolts to the Revo-X tent channel, an additional telescopic leg with spigot, the riser and short spring pole kit for 270 awnings mounted close to a Revo-X roof top tent, the 7-way adjustable 35mm cross bar bracket kit for genuine Suzuki Jimny and other 35mm cross bars, the oversize-head stainless screw kit for the awning rear slot and M8 channel sliders, and a 12\/24V dual USB-A socket to power the awning LED strips.\u003c\/p\u003e\u003cp\u003eOther mounting brackets are in \u003ca href=\"\/collections\/awning-brackets\"\u003eAwning Brackets\u003c\/a\u003e; walls are in \u003ca href=\"\/collections\/awning-walls-kits\"\u003eAwning Walls \u0026amp; Kits\u003c\/a\u003e. Not sure what suits your setup? \u003ca href=\"\/pages\/contact-us\"\u003eMessage us\u003c\/a\u003e with your awning size and vehicle.\u003c\/p\u003e","products":[{"product_id":"enerdrive-round-dual-usb-a-charger-4-8a-green-led-12-24v-with-cover-ea-usb-02","title":"Enerdrive – Round Dual USB-A Charger 4.8A (Green LED, 12\/24V, with Cover) – EA-USB-02","description":"\u003cp data-start=\"117\" data-end=\"549\"\u003eCompact, tough and super handy—the \u003cstrong data-start=\"152\" data-end=\"175\"\u003eEnerdrive EA-USB-02\u003c\/strong\u003e gives you \u003cstrong data-start=\"186\" data-end=\"232\"\u003edual USB-A outlets (2.4A each, 4.8A total)\u003c\/strong\u003e with a \u003cstrong data-start=\"240\" data-end=\"260\"\u003egreen status LED\u003c\/strong\u003e and a \u003cstrong data-start=\"267\" data-end=\"288\"\u003erubber dust cover\u003c\/strong\u003e to keep dust and spray at bay. It’s a neat \u003cstrong data-start=\"332\" data-end=\"354\"\u003eround, flush-mount\u003c\/strong\u003e fit that drops straight into a 29 mm hole, perfect for canopies, caravans, boats and touring rigs. Works on \u003cstrong data-start=\"463\" data-end=\"479\"\u003e12 V or 24 V\u003c\/strong\u003e systems and charges phones, tablets, action cams, GPS units and more.\u003c\/p\u003e\n\u003cp data-start=\"551\" data-end=\"572\"\u003e\u003cstrong data-start=\"551\" data-end=\"570\"\u003eWhy buy from us\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"573\" data-end=\"773\"\u003e\n\u003cli data-start=\"573\" data-end=\"627\"\u003e\n\u003cp data-start=\"575\" data-end=\"627\"\u003eReal 12 V advice from installers who use this gear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"628\" data-end=\"669\"\u003e\n\u003cp data-start=\"630\" data-end=\"669\"\u003eFast QLD dispatch, honest stock comms\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"670\" data-end=\"721\"\u003e\n\u003cp data-start=\"672\" data-end=\"721\"\u003eFair everyday pricing + sharp clearance options\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"722\" data-end=\"773\"\u003e\n\u003cp data-start=\"724\" data-end=\"773\"\u003eLocal post-sale support to get your setup dialled\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"775\" data-end=\"793\"\u003eKey features\u003c\/h3\u003e\n\u003cp data-start=\"794\" data-end=\"1014\"\u003e• \u003cstrong data-start=\"796\" data-end=\"814\"\u003eDual USB-A 5 V\u003c\/strong\u003e outputs, \u003cstrong data-start=\"824\" data-end=\"850\"\u003e2.4A each (4.8A total)\u003c\/strong\u003e\u003cbr data-start=\"850\" data-end=\"853\"\u003e• \u003cstrong data-start=\"855\" data-end=\"877\"\u003e12\/24 V compatible\u003c\/strong\u003e (vehicles, vans, boats)\u003cbr data-start=\"901\" data-end=\"904\"\u003e• \u003cstrong data-start=\"906\" data-end=\"919\"\u003eGreen LED\u003c\/strong\u003e power indicator\u003cbr data-start=\"935\" data-end=\"938\"\u003e• \u003cstrong data-start=\"940\" data-end=\"961\"\u003eRubber dust cover\u003c\/strong\u003e included\u003cbr data-start=\"970\" data-end=\"973\"\u003e• \u003cstrong data-start=\"975\" data-end=\"997\"\u003eRound, flush mount\u003c\/strong\u003e – clean OEM look\u003c\/p\u003e\n\u003ch3 data-start=\"1016\" data-end=\"1039\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp data-start=\"1040\" data-end=\"1144\"\u003e• Enerdrive EA-USB-02 dual USB-A socket (green LED)\u003cbr data-start=\"1091\" data-end=\"1094\"\u003e• Rubber dust cover\u003cbr data-start=\"1113\" data-end=\"1116\"\u003e• Basic mounting\/wiring info\u003c\/p\u003e\n\u003ch3 data-start=\"1146\" data-end=\"1170\"\u003eTech specs (quick)\u003c\/h3\u003e\n\u003cp data-start=\"1171\" data-end=\"1452\"\u003e• Model: \u003cstrong data-start=\"1180\" data-end=\"1193\"\u003eEA-USB-02\u003c\/strong\u003e\u003cbr data-start=\"1193\" data-end=\"1196\"\u003e• Outputs: \u003cstrong data-start=\"1207\" data-end=\"1238\"\u003e2 × USB-A, 5 V \/ 2.4 A each\u003c\/strong\u003e (max 4.8 A)\u003cbr data-start=\"1250\" data-end=\"1253\"\u003e• System voltage: \u003cstrong data-start=\"1271\" data-end=\"1286\"\u003e12 V \/ 24 V\u003c\/strong\u003e\u003cbr data-start=\"1286\" data-end=\"1289\"\u003e• Cut-out \/ face Ø: \u003cstrong data-start=\"1309\" data-end=\"1326\"\u003e29 mm \/ 37 mm\u003c\/strong\u003e\u003cbr data-start=\"1326\" data-end=\"1329\"\u003e• Recessed depth: \u003cstrong data-start=\"1347\" data-end=\"1357\"\u003e≈42 mm\u003c\/strong\u003e\u003cbr data-start=\"1357\" data-end=\"1360\"\u003e• Typical warranty: \u003cstrong data-start=\"1380\" data-end=\"1393\"\u003e1–5 years\u003c\/strong\u003e (retailer dependent; Enerdrive accessories typically 1 yr)\u003c\/p\u003e","brand":"Enerdrive","offers":[{"title":"Default Title","offer_id":45088916766916,"sku":"EA-USB-02","price":16.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/Enerdrive12VPowerUSBA4.8A-06469.jpg?v=1759380855"},{"product_id":"revo-x-awning-risers-and-short-spring-pole-pair-suits-close-mounted-270-awnings","title":"Revo X Awning Risers and Short Spring Pole Pair - (Suits Close Mounted 270 Awnings)","description":"\u003cp\u003e\u003cstrong\u003eRevo X - Awning Riser Pair\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your 270° awning spring poles are fouling on your Revo-X roof top tent at your preferred ride height, \u003cbr\u003ethese awning risers are the fix.\u003c\/p\u003e\n\u003cp\u003eThe Revo-X Awning Riser Pair raises your spring pole mounting point by 100mm, giving your awning arm \u003cbr\u003efull clearance without compromising your setup or requiring any modifications to the tent itself.\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003cbr\u003e- 1x Pair of mounting brackets\u003cbr\u003e- Hardware kit\u003cbr\u003e- Spring pole bases\u003cbr\u003e- Short spring poles\u003c\/p\u003e\n\u003cp\u003eSuits: Rainger Revo-X RTT with closely-mounted 270° awnings where standard spring pole height causes \u003cbr\u003earm contact or restricted movement.\u003c\/p\u003e\n\u003cp\u003eNot sure if this is the right fix for your setup? Email us at sales@raingersupplyco.com.au with your \u003cbr\u003eawning brand and a photo — we'll confirm before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rainger Supply Co","offers":[{"title":"Default Title","offer_id":45714277564612,"sku":"Awn-Riser-Pair","price":39.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/5A13C94F-7B47-455D-8F6B-2A53CCBF077A.jpg?v=1769582679"},{"product_id":"rainger-revo-x-awning-ratchet-rope-hook-bracket","title":"Rainger Revo-X Awning Ratchet Rope Hook Bracket","description":"\u003cp\u003e\u003cstrong\u003eA dedicated awning ratchet rope hook point for your Rainger Revo-X roof top tent.\u003c\/strong\u003e This laser-cut bracket bolts directly to the Revo-X mounting channel and gives you a clean, fixed slot for hooking your awning ratchet rope when setting up camp. No drilling, no sketchy tie-off points, no wrapping straps around whatever happens to be nearby.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy it makes sense on a Revo-X setup\u003c\/strong\u003e\u003cbr\u003e\n• \u003cstrong\u003ePurpose-built for the Revo-X\u003c\/strong\u003e so your awning rope has a proper anchor point on the tent body.\u003cbr\u003e\n• \u003cstrong\u003eHook-slot design\u003c\/strong\u003e gives the ratchet rope a dedicated point to locate into during awning setup.\u003cbr\u003e\n• \u003cstrong\u003eNo drilling required\u003c\/strong\u003e — mounts into the tent channel using the included stainless T-slot hardware.\u003cbr\u003e\n• \u003cstrong\u003e3mm stainless steel construction\u003c\/strong\u003e with black powdercoating for a clean, low-profile finish.\u003cbr\u003e\n• \u003cstrong\u003e316 stainless mounting hardware included\u003c\/strong\u003e for better corrosion resistance around rain, salt, dust and touring use.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhy buy from us\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically around the Rainger Revo-X roof top tent system\u003c\/li\u003e\n\u003cli\u003eSupplied with the correct 316 stainless T-slot mounting hardware\u003c\/li\u003e\n\u003cli\u003ePractical touring accessory built to solve a real setup problem\u003c\/li\u003e\n\u003cli\u003eLocal support before and after the sale\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cp\u003e\n• Dedicated awning ratchet rope hook bracket for Rainger Revo-X roof top tents\u003cbr\u003e\n• Laser-cut 3mm stainless steel plate\u003cbr\u003e\n• Black powdercoated finish\u003cbr\u003e\n• Integrated hook slot for awning ratchet rope use\u003cbr\u003e\n• Mounts using the Revo-X tent channel \/ T-slot system\u003cbr\u003e\n• No drilling or permanent modification required\u003cbr\u003e\n• Compact low-profile shape to suit the tent body\u003cbr\u003e\n• Supplied with 316 stainless mounting hardware\u003c\/p\u003e\n\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cp\u003e\n• 1 x Rainger Revo-X awning ratchet rope hook bracket\u003cbr\u003e\n• 4 x Stainless 316 T-slot nuts\u003cbr\u003e\n• 4 x Stainless 316 M8 x 12mm bolts\u003c\/p\u003e\n\n\u003ch2\u003eTech specs quick\u003c\/h2\u003e\n\u003cp\u003e\n• Brand: \u003cstrong\u003eRainger\u003c\/strong\u003e\u003cbr\u003e\n• Product type: \u003cstrong\u003eAwning rope hook bracket\u003c\/strong\u003e\u003cbr\u003e\n• Compatibility: \u003cstrong\u003eRainger Revo-X roof top tents\u003c\/strong\u003e\u003cbr\u003e\n• Material: \u003cstrong\u003e3mm stainless steel\u003c\/strong\u003e\u003cbr\u003e\n• Finish: \u003cstrong\u003eBlack powdercoat\u003c\/strong\u003e\u003cbr\u003e\n• Hardware: \u003cstrong\u003e316 stainless steel T-slot nuts and M8 x 12mm bolts\u003c\/strong\u003e\u003cbr\u003e\n• Installation: \u003cstrong\u003eBolt-on \/ no drilling required\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2\u003eImportant note\u003c\/h2\u003e\n\u003cp\u003eThis bracket is designed as an awning ratchet rope hook point only. It is not a recovery point, lifting point, vehicle tie-down point or load-rated structural anchor.\u003c\/p\u003e","brand":"Rainger Supply Co","offers":[{"title":"Default Title","offer_id":46132627669188,"sku":"AWN-HOOK_BRK1","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/Ratchet_Rope_Bracket_-_Laser_Cut-01784.jpg?v=1782788675"},{"product_id":"rainger-duo-awning-ratchet-ropes-pair","title":"Rainger Duo Awning Ratchet Ropes - Pair","description":"\u003cp\u003e\u003cstrong\u003eQuick-adjust ratchet ropes for fast, tight awning tensioning — sold as a pair.\u003c\/strong\u003e Rainger Duo Awning Ratchet Ropes let you pull your awning guy lines drum-tight in seconds and lock them off with a simple pulley ratchet — no knots to fuss with, and easy micro-adjustment as the canvas moves with wind and temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many you need\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e270° 6-arm awning or 180° awning: \u003cstrong\u003e2 ratchet ropes\u003c\/strong\u003e (one pair)\u003c\/li\u003e\n\u003cli\u003e270° 4-arm awning: \u003cstrong\u003e1 ratchet rope\u003c\/strong\u003e (a pair leaves you a spare)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAlso handy for\u003c\/strong\u003e securing light loads or running as quick-adjust guy ropes anywhere around camp, thanks to the fast pulley-tension design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair (2 pieces)\u003c\/li\u003e\n\u003cli\u003ePulley ratchet tensioner with moulded hook for fast, tight adjustment and lock-off\u003c\/li\u003e\n\u003cli\u003eReflective tracer cord for better visibility around camp at night\u003c\/li\u003e\n\u003cli\u003eMoulded S-hook ends for quick attachment to awning loops and anchor points\u003c\/li\u003e\n\u003cli\u003eAvailable in Midnight Black or Orange\u003c\/li\u003e\n\u003cli\u003eDesigned for Australian conditions\u003c\/li\u003e\n\u003cli\u003eOutdoor use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rainger Supply Co","offers":[{"title":"Midnight Black","offer_id":46301056270532,"sku":"AWN-RATCHET-BLK","price":39.99,"currency_code":"AUD","in_stock":true},{"title":"Orange","offer_id":46301059023044,"sku":"AWN-RATCHET-ORG","price":39.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/AwningRatchetRope-07053.jpg?v=1782288399"},{"product_id":"rainger-special-m8-hex-screw-kit-oversize-13-8mm-head-316-stainless-8-pack-suits-awning-rear-slot-m8-channel-sliders","title":"Rainger - SPECIAL M8 Hex Screw Kit - Oversize 13.8mm Head - 316 Stainless 8 Pack - Suits Awning Rear Slot \u0026 M8 Channel Sliders","description":"\u003cp\u003e\u003cstrong\u003eThe oversize-head track bolt that is almost impossible to buy in Australia - now in A4 316 marine stainless.\u003c\/strong\u003e A lot of 270 and 180 degree awnings on the market are built around a 13.8mm \/ 14mm rear mounting slot, and they ship with an oversize-head bolt to suit it. Every Rainger Duo awning does. So do many others, and the same head runs in M8 channel slider systems.\u003c\/p\u003e\u003cp\u003eThe catch is what happens later. Misplace the bolts that came with your awning, or need a different length for a thicker bracket, and you will struggle to replace them here - almost no Australian supplier stocks an oversize-head M8. That is the gap we are bridging. We import them properly, in A4 316 marine grade, so the industry has somewhere to go.\u003c\/p\u003e\u003cp\u003eEach bolt comes complete with an \u003cstrong\u003eA4 316 stainless nyloc nut\u003c\/strong\u003e and a \u003cstrong\u003estainless mudguard washer\u003c\/strong\u003e. The large washer spreads the load properly over brackets and thin sheet, and the nyloc will not vibrate loose on corrugations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the odd 13.8mm head?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEvery off-the-shelf M8 hex sold here has a 13.0mm head. In a 14mm awning track that leaves a full millimetre of play. It still works - plenty of people run a standard M8 and never have a problem - but you have to hold the head square as you tighten, and if you overtighten it the head can turn in the track.\u003c\/p\u003e\u003cp\u003eThe 13.8mm head fills the channel with just enough clearance to slide. It locks square like a T-bolt, the bigger head simply holds better across the slot, and it tightens with one spanner. That is the whole trick, and that 0.8 of a millimetre is why no local bolt shop has them.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy this kit\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOversize 13.8mm head - suits the 13.8mm \/ 14mm awning rear slot used across much of the industry, plus M8 channel sliders\u003c\/li\u003e\n\u003cli\u003eLarger head bears across more of the slot, so it holds better than a standard 13.0mm hex\u003c\/li\u003e\n\u003cli\u003eFull A4 316 marine-grade stainless - bolt, nyloc nut AND mudguard washer\u003c\/li\u003e\n\u003cli\u003eM8 x 1.25 thread - the standard pitch across 4WD and touring accessories\u003c\/li\u003e\n\u003cli\u003eThe replacement for awning bolts you have lost, or the different length you cannot source locally\u003c\/li\u003e\n\u003cli\u003e8-piece kits - real quantities for real installs\u003c\/li\u003e\n\u003cli\u003eSuits awning wall brackets, accessory mounts, light bars, shovel holders and custom fit-outs off the awning channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eChoose your length (all packs = 8 bolts + 8 nyloc nuts + 8 mudguard washers)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20mm - awning bracket installs.\u003c\/strong\u003e Perfect for mounting awnings into 3mm-thick brackets - exactly like the Rainger Revo-X bracket range. If you are bolting an awning to L-brackets or RTT brackets, this is your length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30mm - thicker brackets and spacers.\u003c\/strong\u003e Extra reach for heavier-gauge brackets, doubled plates or setups with packers in the stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45mm - roof top tent installs.\u003c\/strong\u003e Our recommendation for RTT mounting - this is effectively the same fastener that comes standard with the Rainger Revo-X (45mm), so it is the direct spare or replacement for tent installs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: M8 x 1.25\u003c\/li\u003e\n\u003cli\u003eHead: Hex, oversize 13.8mm across flats (standard M8 is 13.0mm)\u003c\/li\u003e\n\u003cli\u003eMaterial: A4 316 marine grade stainless steel (bolt, nut and washer)\u003c\/li\u003e\n\u003cli\u003ePack: 8 x bolts, 8 x nyloc nuts, 8 x mudguard washers\u003c\/li\u003e\n\u003cli\u003eSuits: 13.8mm \/ 14mm awning rear mounting slot and M8 channel sliders\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNot sure if these are the ones you lost?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMeasure the head of a bolt still in your awning across the flats with a vernier or a ruler. 13.8mm means these are yours. 13.0mm means you have standard M8 in there. Either way, \u003ca href=\"\/pages\/contact-us\"\u003esend us a photo of your track\u003c\/a\u003e and we will tell you what you need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePairs with\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainger-aluminium-rtt-channel-sliding-plates\"\u003eAluminium RTT Channel Sliding Plates\u003c\/a\u003e - M8 channel sliders these bolts run straight into\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/rainger-clamping-plates-premium-universal-rubberised-non-slip-roof-top-tent\"\u003eRubberised Non-Slip Clamping Plates\u003c\/a\u003e - the clamping side of a proper RTT mount\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/m8-x-1-25mm-316-marine-grade-stainless-hex-bolt-kit-8-pack-20mm-45mm-55mm-70mm\"\u003eStandard M8 316 Hex Bolt Kits\u003c\/a\u003e - for everything outside the track\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePro tip: for stainless-on-stainless, a dab of anti-seize prevents galling and keeps your torque accurate.\u003c\/em\u003e\u003c\/p\u003e","brand":"Rainger Supply Co","offers":[{"title":"20mm","offer_id":46456467325124,"sku":"M8-OS-20MM-SS","price":19.95,"currency_code":"AUD","in_stock":true},{"title":"30mm","offer_id":46456467456196,"sku":"M8-OS-30MM-SS","price":22.95,"currency_code":"AUD","in_stock":true},{"title":"45mm","offer_id":46456467488964,"sku":"M8-OS-45MM-SS","price":24.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/SpecialCN13.8MMStainlessBoltKits-Rainger-01955.jpg?v=1785294562"},{"product_id":"rainger-duo-awning-additional-telescopic-leg-with-spigot","title":"Rainger Duo Awning - Additional Telescopic Leg with Spigot","description":"\u003cstyle\u003e\n.rg-callout { background:#f7f7f7; border:1px solid #e5e5e5; border-left:4px solid #1a1a1a; padding:16px 18px; margin:0 0 24px; }\n.rg-callout p { margin:0 0 10px; line-height:1.65; }\n.rg-callout p:last-child { margin-bottom:0; }\n.rg-list { margin:10px 0 18px 18px; padding:0; }\n.rg-list li { margin:0 0 8px; line-height:1.6; }\n.rg-faq { border-bottom:1px solid #e5e5e5; }\n.rg-faq summary { padding:14px 0; cursor:pointer; list-style:none; font-size:.95em; font-weight:600; color:#1a1a1a; display:flex; justify-content:space-between; align-items:center; }\n.rg-faq summary::-webkit-details-marker { display:none; }\n.rg-faq summary::after { content:'+'; font-size:1.2em; font-weight:300; color:#888; }\n.rg-faq[open] summary::after { content:'-'; }\n.rg-faq .rg-ans { padding:0 0 16px; line-height:1.7; color:#444; }\n.rg-faq-section { border-top:3px solid #1a1a1a; margin-top:32px; padding-top:24px; }\n\u003c\/style\u003e\n\n\u003cp\u003e\u003cstrong\u003ePut support exactly where you want it.\u003c\/strong\u003e This is a spare or additional telescopic leg for the Rainger Duo awning range - the same leg that comes with the awning. Each leg has a spigot on top that inserts into the end of any awning arm, at any position where there is not already an arm running.\u003c\/p\u003e\n\n\u003cp\u003eHandy when you want extra support on the windward side, a little more height in one corner, or a replacement for a leg that has gone missing.\u003c\/p\u003e\n\n\u003cdiv class=\"rg-callout\"\u003e\n\u003cp\u003e\u003cstrong\u003eBest added to your awning order, or collected in person.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe leg is \u003cstrong\u003e137cm long\u003c\/strong\u003e when packed, so it is an awkward and expensive parcel to send on its own. Two ways to avoid that:\u003c\/p\u003e\n\u003cul class=\"rg-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd it to your awning order\u003c\/strong\u003e - it travels with the awning at no meaningful extra freight cost.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollect from Rainger HQ\u003c\/strong\u003e - Unit 3\/55 Edison Crescent, Baringa QLD 4551.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe can still ship one on its own if you need it. \u003ca href=\"\/pages\/contact-us\"\u003eMessage us\u003c\/a\u003e and we will sort out the freight with you before you pay anything.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow it works\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"rg-list\"\u003e\n\u003cli\u003eSpigot on top inserts into the open end of any awning arm\u003c\/li\u003e\n\u003cli\u003eFits any arm position where there is not already an arm present\u003c\/li\u003e\n\u003cli\u003eTelescopic, so you can set the height to suit uneven ground\u003c\/li\u003e\n\u003cli\u003eIdentical to the leg supplied with the awning\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo I need one?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMost setups are fine on the legs the awning came with - the ratchet ropes do the primary tensioning, and the legs are additional support. Add a leg if you camp somewhere consistently windy, want to firm up a particular corner, or have lost the original.\u003c\/p\u003e\n\n\u003cdiv class=\"rg-faq-section\"\u003e\n\u003cp style=\"font-size:1.1em;font-weight:700;margin:0 0 8px;\"\u003eFrequently Asked Questions\u003c\/p\u003e\n\n\u003cdetails class=\"rg-faq\"\u003e\n\u003csummary\u003eWill it fit my awning?\u003c\/summary\u003e\n\u003cdiv class=\"rg-ans\"\u003e\u003cp\u003eIt is made for the Rainger Duo awning range and inserts into the arm ends. If you are not certain which Duo awning you have, or you are running another brand, send us a photo of your arm end and we will confirm before you order.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"rg-faq\"\u003e\n\u003csummary\u003eIs this the same as the leg that came with my awning?\u003c\/summary\u003e\n\u003cdiv class=\"rg-ans\"\u003e\u003cp\u003eYes. It is the same portable telescopic leg, sold individually as a spare or an addition.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"rg-faq\"\u003e\n\u003csummary\u003eWhere exactly does it go?\u003c\/summary\u003e\n\u003cdiv class=\"rg-ans\"\u003e\u003cp\u003eInto the end of any arm at a position where there is not already an arm running down. That lets you add support at any point around the awning perimeter where you feel you need it.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"rg-faq\"\u003e\n\u003csummary\u003eWhy is shipping awkward?\u003c\/summary\u003e\n\u003cdiv class=\"rg-ans\"\u003e\u003cp\u003eThe leg is 137cm long packed. On its own that is an oversize parcel and the freight is out of proportion to the item. Ordered alongside an awning it goes in the same consignment. Pickup from Baringa is free. Either way, message us first and we will work out the cheapest way to get it to you.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"rg-faq\"\u003e\n\u003csummary\u003eHow many can I add?\u003c\/summary\u003e\n\u003cdiv class=\"rg-ans\"\u003e\u003cp\u003eAs many as you have free arm ends for. Each leg needs a position where there is not already an arm present.\u003c\/p\u003e\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003ePairs with\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"rg-list\"\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/awnings-270-degree\"\u003eBrowse Freestanding Awnings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/pages\/contact-us\"\u003eContact Us\u003c\/a\u003e - photo of your arm end and we will confirm fit\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/shipping-and-delivery\"\u003eShipping and Delivery\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rainger Supply Co","offers":[{"title":"Default Title","offer_id":46603823087812,"sku":"DUO-AWN-LEG-SPIGOT","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/TelescopicAwningLegs2.5M-02393.jpg?v=1788733323"},{"product_id":"awning-l-brackets-7-way-adjustable-35mm-cross-bar-kit-suits-suzuki-jimny-genuine-bars-pair","title":"Awning L Brackets - 7 Way Adjustable - 35mm Cross Bar Kit (Pair)","description":"\u003cp\u003e\u003cstrong\u003eRainger Universal L Brackets for Awnings - 35mm Cross Bar Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2 Piece Design - 7 way Adjustable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNow Even Longer \/ More Adjustable - great for getting more head height under your awning.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSame bracket, complete cross bar kit.\u003c\/strong\u003e Everything in our 7 Way Adjustable L Bracket pack, plus the clamping hardware to mount straight to genuine Suzuki Jimny cross bars and other 35mm wide bars - no drilling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstructed Of\u003c\/strong\u003e - 3.6mm Laser Cut 2PCE 304 Stainless Steel - 8mm Bolts locking in your height selection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e150MM Height Adjustment Available up or down.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounts With\u003c\/strong\u003e - M8 Stainless Nut and Bolt Pack Including - 8PCE M8x55mm - 8PCE M8x20mm Hex Bolts - 16PCE M8 Nyloc - 16 PCE M8 Stainless Washers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e35mm Cross Bar Clamping Kit (additional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4PCE 5mm Stainless Steel Clamping Plates\u003c\/li\u003e\n\u003cli\u003e8PCE 316 Grade Stainless Bolts and Nuts\u003c\/li\u003e\n\u003cli\u003e16PCE 316 Grade Stainless Large Mudguard Washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e 1 Pair of Complete Brackets, Stainless Hardware Pack and 35mm Cross Bar Clamping Kit\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo suit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGenuine Suzuki Jimny Cross Bars and other 35mm wide bars\u003c\/strong\u003e - Clamps to the bar, no drilling. Pairs with the \u003ca href=\"https:\/\/www.raingersupplyco.com.au\/products\/rainger-duo-270-degree-awning-1-7m-jimny-jeep\"\u003eRainger Duo 270 Degree Awning - 1.7M Jimny\/Jeep\/SWB\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDUO 270 or 180 Awning\u003c\/strong\u003e - Works perfectly with 1 pair\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Awnings\u003c\/strong\u003e - This bracket is built with extra slots to accommodate a wide range of Awnings - See Measurement Photos or contact us.\u003c\/p\u003e","brand":"Rainger Supply Co","offers":[{"title":"Default Title","offer_id":46873170706628,"sku":"AWN-L-BRACKET-7-WAY-35MM","price":129.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/B2964D6E-9C93-40DB-935D-2C35F17FE174.jpg?v=1790723831"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/collections\/Ratchet_Rope_Bracket_-_Laser_Cut-01784.jpg?v=1792236130","url":"https:\/\/www.raingersupplyco.com.au\/collections\/awning-accessories.oembed","provider":"Rainger Supply Co","version":"1.0","type":"link"}