{"product_id":"rainger-special-m8-hex-screw-kit-oversize-13-8mm-head-316-stainless-8-pack-suits-awning-rear-slot-m8-channel-sliders","title":"Rainger - SPECIAL M8 Hex Screw Kit - Oversize 13.8mm Head - 316 Stainless 8 Pack - Suits Awning Rear Slot \u0026 M8 Channel Sliders","description":"\u003cp\u003e\u003cstrong\u003eThe bolt that locks straight into the back of your awning - no T-nut, no fishing, no drama.\u003c\/strong\u003e The Rainger SPECIAL M8 Hex Screw Kit runs an oversize 13.8mm head that seats into the 13.8mm \/ 14mm rear mounting slot found on the back of most 270 and 180 degree awnings across the industry - including every Rainger Duo awning - plus M8 channel slider systems.\u003c\/p\u003e\u003cp\u003eStandard M8 hex heads can pull through or spin in these slots. The oversize head is the fix: drop it in the channel and it holds square while you tighten. Each bolt comes complete with a \u003cstrong\u003e316 stainless nyloc nut\u003c\/strong\u003e and a \u003cstrong\u003estainless mudguard washer\u003c\/strong\u003e - the large washer spreads the load properly over brackets and thin sheet, and the nyloc will not vibrate loose on corrugations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy the odd 13.8mm head?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eNo bolt shop in Australia stocks this - every off-the-shelf M8 hex is a 13.0mm head, and in a 14mm awning track that is a full millimetre of slop: the head spins when you torque it and works loose on corrugations. These are purpose-made track fasteners. The 13.8mm head fills the 14mm channel with just enough clearance to slide, locks square like a T-bolt, and tightens with one spanner. That is the whole trick - and why we import them specially.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy this kit\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOversize 13.8mm head - seats into the industry-standard 13.8mm \/ 14mm awning rear slot and M8 channel sliders\u003c\/li\u003e\n\u003cli\u003eFull 316 marine-grade stainless - bolt, nyloc nut AND mudguard washer\u003c\/li\u003e\n\u003cli\u003eM8 x 1.25 thread - the standard pitch across 4WD and touring accessories\u003c\/li\u003e\n\u003cli\u003e8-piece kits - real quantities for real installs\u003c\/li\u003e\n\u003cli\u003eSuits awning wall brackets, accessory mounts, light bars, shovel holders and custom fit-outs off the awning channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eChoose your length (all packs = 8 bolts + 8 nyloc nuts + 8 mudguard washers)\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20mm - awning bracket installs.\u003c\/strong\u003e Perfect for mounting awnings into 3mm-thick brackets - exactly like the Rainger Revo-X bracket range. If you are bolting an awning to L-brackets or RTT brackets, this is your length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30mm - thicker brackets and spacers.\u003c\/strong\u003e Extra reach for heavier-gauge brackets, doubled plates or setups with packers in the stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45mm - roof top tent installs.\u003c\/strong\u003e Our recommendation for RTT mounting - this is effectively the same fastener that comes standard with the Rainger Revo-X (45mm), so it is the direct spare or replacement for tent installs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eKey specifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread: M8 x 1.25\u003c\/li\u003e\n\u003cli\u003eHead: Hex, oversize 13.8mm across flats\u003c\/li\u003e\n\u003cli\u003eMaterial: 316 marine grade stainless steel (bolt, nut and washer)\u003c\/li\u003e\n\u003cli\u003ePack: 8 x bolts, 8 x nyloc nuts, 8 x mudguard washers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePairs with\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.raingersupplyco.com.au\/products\/rainger-aluminium-rtt-channel-sliding-plates\"\u003eAluminium RTT Channel Sliding Plates\u003c\/a\u003e - M8 channel sliders these bolts run straight into\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.raingersupplyco.com.au\/products\/rainger-clamping-plates-premium-universal-rubberised-non-slip-roof-top-tent\"\u003eRubberised Non-Slip Clamping Plates\u003c\/a\u003e - the clamping side of a proper RTT mount\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.raingersupplyco.com.au\/products\/m8-x-1-25mm-316-marine-grade-stainless-hex-bolt-kit-8-pack-20mm-45mm-55mm-70mm\"\u003eStandard M8 316 Hex Bolt Kits\u003c\/a\u003e - for everything outside the track\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePro tip: for stainless-on-stainless, a dab of anti-seize prevents galling and keeps your torque accurate.\u003c\/em\u003e\u003c\/p\u003e","brand":"RAINGER SUPPLY CO","offers":[{"title":"20mm","offer_id":46456467325124,"sku":"M8-OS-20MM-SS","price":19.95,"currency_code":"AUD","in_stock":true},{"title":"30mm","offer_id":46456467456196,"sku":"M8-OS-30MM-SS","price":22.95,"currency_code":"AUD","in_stock":true},{"title":"45mm","offer_id":46456467488964,"sku":"M8-OS-45MM-SS","price":24.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/SpecialCN13.8MMStainlessBoltKits-Rainger-01955.jpg?v=1785294562","url":"https:\/\/www.raingersupplyco.com.au\/products\/rainger-special-m8-hex-screw-kit-oversize-13-8mm-head-316-stainless-8-pack-suits-awning-rear-slot-m8-channel-sliders","provider":"Rainger Supply Co","version":"1.0","type":"link"}