{"product_id":"starlink-mini-roof-top-tent-kit-mount-tilt-bracket","title":"Starlink Mini Roof Top Tent Kit - Mount, Tilt Bracket and Hardware","description":"\u003cp\u003e\u003cstrong\u003eA roof top tent lid is not flat. A Starlink Mini needs to sit close to level. That is the whole problem, and this kit is the fix.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eEverything here is sold as one kit because the parts only work as a set. You get the Australian made Starlink Mini mount, the tilting adjustable bracket that levels the dish against a curved or sloped tent lid, and the mounting hardware to fix it down properly.\u003c\/p\u003e\n\n\u003ch3\u003eWhich setup are you running?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWagons - this kit.\u003c\/strong\u003e On a wagon the tent takes up the rack, so there is no room left to put a Starlink anywhere on the rack itself. The dish has to go on the tent, and that is exactly where the tilting bracket earns its place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual cabs with a separate cab rack - you may not need the tilt.\u003c\/strong\u003e If you run a cab rack forward of the tent, you often already have a flat spot to work with, and the \u003ca href=\"\/products\/starlink-mini-roof-rack-mount-anderson-plug\"\u003estandard non-tilting mount\u003c\/a\u003e will do the job on its own, for less. \u003ca href=\"\/pages\/contact-us\"\u003eTell us what you are running\u003c\/a\u003e and we will tell you which one you actually need before you spend the money.\u003c\/p\u003e\n\n\u003ch3\u003eWhy the tilt bracket matters\u003c\/h3\u003e\n\u003cp\u003eMount a Starlink Mini flat onto a hardshell tent and it sits at whatever angle the lid gives you. The tilting bracket is adjustable, so you set the dish to the horizontal plane regardless of the surface under it. It suits the Revo X and other hardshell roof top tents.\u003c\/p\u003e\n\n\u003ch3\u003eRunning a Rainger Revo-X? Add the third rail\u003c\/h3\u003e\n\u003cp\u003eThe tilt bracket fixes to the lid with M8 T-slot hardware, so it needs a rail to run in. On a Rainger Revo-X we suggest the \u003ca href=\"\/products\/revo-x-third-extrusion-cross-rail-roof-rack-kit\"\u003eRevo X Third Extrusion Cross Rail - Roof Rack Kit\u003c\/a\u003e: it gives the Starlink its own rail on the lid and leaves your existing cross rails free for the rest of your gear.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStarlink Mini mounting bracket, 3mm 5005 aluminium, laser cut and folded\u003c\/li\u003e\n\u003cli\u003eTilting adjustable bracket, levels the dish to horizontal on a tent lid\u003c\/li\u003e\n\u003cli\u003e4 x M8 x 12mm dome head bolts and T slots\u003c\/li\u003e\n\u003cli\u003e25cm Anderson to DC Starlink Mini cable\u003c\/li\u003e\n\u003cli\u003eEVA foam anti-shock cradle, 85 kg\/m3 density\u003c\/li\u003e\n\u003cli\u003eWhite protective Perspex cover, 3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThe Starlink Mini dish itself is not included.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eBuilt to survive corrugations\u003c\/h3\u003e\n\u003cp\u003eThe dish sits in an EVA foam shock cradle built on the same idea as a Pelican case insert, so stutter bumps and corrugations are not transmitted straight into the hardware. A 3mm Perspex cover goes over the top to keep stones, branches and UV off it.\u003c\/p\u003e\n\u003cp\u003eThe Anderson to DC cable is already made up, so the dish runs off your 12V system rather than an inverter and a wall plug.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMount bracket: 3mm 5005 aluminium, precision laser cut and folded\u003c\/li\u003e\n\u003cli\u003eShock insert: EVA foam, 85 kg\/m3 density\u003c\/li\u003e\n\u003cli\u003eCover: 3mm high gloss Perspex, white as standard\u003c\/li\u003e\n\u003cli\u003eMount external size: 383 x 292 x 54 mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eTent hardware: 4 x M8 x 12mm dome head bolts with T slots\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Brisbane, Australia\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAlso suits racks and trays\u003c\/h3\u003e\n\u003cp\u003eThe mount fits Rhino-Rack Pioneer Platform and Pioneer 6, Yakima Lock N Load, Rola Titan Tray and Front Runner, and works with ARB Base Rack bridging plates. Rack fastener kits use M8 coarse thread (1.25mm pitch) 13mm long bolts, and slot nut sizes differ between racks. Tell us what you are running and we will match it.\u003c\/p\u003e\n\n\u003ch3\u003eHeat note, worth knowing in QLD\u003c\/h3\u003e\n\u003cp\u003eThe Perspex covers are rated to +75C with short term tolerance to +90C. In hotter parts of the country the white or clear cover holds less heat than a dark one.\u003c\/p\u003e\n\n\u003ch3\u003eNot sure what you need?\u003c\/h3\u003e\n\u003cp\u003eTell us what you are mounting to and which tent you run, and we will tell you exactly which parts you need. \u003ca href=\"\/pages\/contact-us\"\u003eContact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"SVNTY OFFROAD","offers":[{"title":"Default Title","offer_id":46873285165252,"sku":"SLM-PUB01-KIT","price":803.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/E5294229-CD48-4815-862F-0FE8B5734D3F.jpg?v=1790723366","url":"https:\/\/www.raingersupplyco.com.au\/products\/starlink-mini-roof-top-tent-kit-mount-tilt-bracket","provider":"Rainger Supply Co","version":"1.0","type":"link"}