{"product_id":"victron-smart-battery-sense-sbs050150200","title":"Victron - Smart Battery Sense Long Range (up to 10m, voltage and temperature over Bluetooth) - SBS050150200","description":"\u003cp\u003e\u003cstrong\u003eThe Victron Smart Battery Sense is a small wireless sensor that sticks to the battery, measures voltage and temperature right at the terminals, and broadcasts both over Bluetooth to your Victron chargers.\u003c\/strong\u003e It is the cheapest way to stop a charger guessing. Operating range is 8 to 60V with an absolute maximum of 65V, so it suits 12V, 24V and 48V banks, and it works from -10C to +60C. This is the long range version, good for up to 10 metres between the sensor and the charger.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRead this before anything else: it measures voltage and temperature only.\u003c\/strong\u003e It does not measure current, it is not a battery monitor, and it will not tell you state of charge or time to go. If you want to know how much is left in the bank, you want a SmartShunt or a BMV-712 Smart. The Battery Sense does one job - it gives chargers a true battery-side reading so they charge to the right voltage.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need this, or do I need a SmartShunt?\u003c\/h3\u003e\n\n\u003cp\u003eWork backwards from the question you want answered.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIf the question is \"how much charge is left?\"\u003c\/strong\u003e - you need a monitor with a shunt. A SmartShunt or a BMV-712 Smart counts amps in and amps out and gives you state of charge. The Battery Sense cannot do this at all.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIf the question is \"is my charger charging to the right voltage?\"\u003c\/strong\u003e - the Battery Sense is exactly the part. It sits on the battery, reports voltage and temperature, and the chargers listening on the network adjust to suit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIf you already own a SmartShunt or a BMV, you do not need this.\u003c\/strong\u003e A VE.Smart network allows only one sense source, and where a BMV and a Smart Battery Sense are both present the BMV takes precedence. The Battery Sense would simply be ignored. Add the BMV temperature sensor to your existing monitor instead.\u003c\/p\u003e\n\n\u003ch3\u003eWhich chargers can actually receive it\u003c\/h3\u003e\n\n\u003cp\u003eThis is the fact worth checking before you buy, because Victron's compatibility list is not universal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThese receive the Smart Battery Sense:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmartSolar MPPT charge controllers\u003c\/li\u003e\n\u003cli\u003eThe Orion XS DC-DC charger\u003c\/li\u003e\n\u003cli\u003eThe Blue Smart IP22 charger\u003c\/li\u003e\n\u003cli\u003eThe Smart IP43 charger\u003c\/li\u003e\n\u003cli\u003eThe Sun Inverter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eThese do not - Victron list them as not supported:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlue Smart IP65 charger\u003c\/li\u003e\n\u003cli\u003eOrion-Tr Smart DC-DC charger\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf your only smart charger is a Blue Smart IP65 or an Orion-Tr Smart, this sensor will not do anything for it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOne more constraint:\u003c\/strong\u003e the Smart Battery Sense is not needed, or allowed, in a system already controlled by a Color Control GX or a Venus GX. Those devices handle the sensing themselves.\u003c\/p\u003e\n\n\u003ch3\u003eThe bit no one explains: VE.Smart Networking\u003c\/h3\u003e\n\n\u003cp\u003eThe Smart Battery Sense is a transmitter. It reads voltage and temperature at the battery and broadcasts them over Bluetooth. A Victron charger on the same VE.Smart network re-tunes its charge voltage off that reading instead of its own terminals. It matters because the charger sits at the end of a cable - it always reads slightly high, so it always stops charging slightly early. Feed it a real battery-side reading and the battery actually reaches full. Temperature is the other half: a cold battery and a hot battery want different charge voltages, and without a temperature source the charger is working off its own internal reading in its own box.\u003c\/p\u003e\n\n\u003cp\u003eA VE.Smart network takes up to ten devices, and \u003cstrong\u003eone sensor can feed several chargers at once\u003c\/strong\u003e - a solar controller, a DC-DC charger and a mains charger can all listen to the same broadcast. But \u003cstrong\u003eonly one sense source is allowed\u003c\/strong\u003e on a network. If a BMV or SmartShunt is present it takes precedence and the Battery Sense is not needed. One sensor, many chargers, is the shape of a correct system.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and temperature at the battery\u003c\/strong\u003e - the two readings a charger cannot get accurately from its own terminals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless\u003c\/strong\u003e - no data cable between the battery and the charger, up to 10 metres in this long range version\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne sensor, several chargers\u003c\/strong\u003e - a single Battery Sense can feed multiple Victron chargers on the same network at the same time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 to 60V operating range\u003c\/strong\u003e - covers 12V, 24V and 48V banks, with an absolute maximum of 65V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-10C to +60C operating temperature\u003c\/strong\u003e - it lives in the battery compartment and copes with it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery low draw\u003c\/strong\u003e - 0.3 mA at 12V when not connected, 1.6 mA at 12V when connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady to fit\u003c\/strong\u003e - self-adhesive backing, pre-crimped eyelets and the required inline fuse are all supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstalling it - read this before you pick a spot\u003c\/h3\u003e\n\n\u003cp\u003eThe back of the unit has self-adhesive tape, so it mounts directly to the battery case or a nearby flat surface. Keep it close to the battery - the whole reason it is accurate is that it measures at the battery, and the supplied cable is 45 cm, which sets your working radius.\u003c\/p\u003e\n\n\u003cp\u003eThe leads terminate in pre-crimped eyelets with a 10 mm hole, so they suit an M10 terminal stud. Land the positive lead on the battery positive and the negative on the battery negative.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe fuse is not optional.\u003c\/strong\u003e A T1A 250V inline fuse is required and it is supplied in the box. Fit it in the positive lead. Do not wire the sensor straight to the battery without it.\u003c\/p\u003e\n\n\u003cp\u003eThen pair it in VictronConnect and join it to the same VE.Smart network as the charger or chargers you want listening. Check your charger is on the supported list above before you start - a Blue Smart IP65 or an Orion-Tr Smart will not receive it - and remember it should not be added to a system already running a Color Control GX or Venus GX.\u003c\/p\u003e\n\n\u003ch3\u003eFull specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures: \u003cstrong\u003ebattery voltage and battery temperature\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not measure: \u003cstrong\u003ecurrent\u003c\/strong\u003e (it is not a battery monitor and does not report state of charge)\u003c\/li\u003e\n\u003cli\u003eOperating voltage: \u003cstrong\u003e8 to 60V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAbsolute maximum voltage: \u003cstrong\u003e65V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable banks: \u003cstrong\u003e12V, 24V and 48V\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: \u003cstrong\u003e-10C to +60C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption at 12V, not connected: \u003cstrong\u003e0.3 mA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption at 12V, joining: \u003cstrong\u003e0.5 mA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConsumption at 12V, connected: \u003cstrong\u003e1.6 mA\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable length: \u003cstrong\u003e45 cm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eEyelet hole: \u003cstrong\u003e10 mm (M10)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRequired fuse: \u003cstrong\u003eT1A 250V inline, supplied\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWireless range: \u003cstrong\u003elong range version, up to 10 m\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eIn the box: \u003cstrong\u003esensor with self-adhesive tape on the back, inline fuse, pre-crimped eyelets\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiving devices supported: \u003cstrong\u003eSmartSolar MPPT, Orion XS, Blue Smart IP22, Smart IP43, Sun Inverter\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eReceiving devices not supported: \u003cstrong\u003eBlue Smart IP65, Orion-Tr Smart\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot for use in systems controlled by: \u003cstrong\u003eColor Control GX or Venus GX\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSKU: \u003cstrong\u003eSBS050150200\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWarranty: \u003cstrong\u003e5 years\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWill this tell me my state of charge?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eNo. It measures voltage and temperature only. It does not measure current, so it cannot count amps in and out and it is not a battery monitor. For state of charge and time to go you need a SmartShunt or a BMV-712 Smart.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eI already have a SmartShunt. Should I add one of these?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eNo. A VE.Smart network allows only one sense source, and where a BMV or SmartShunt is present it takes precedence. Your shunt is already the transmitter. If you want temperature on the network as well, fit the BMV temperature sensor to your shunt's aux input instead.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eWill it work with my Blue Smart IP65 charger?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eNo. Victron list the Blue Smart IP65 and the Orion-Tr Smart as not supported. The devices that can receive it are SmartSolar MPPT charge controllers, the Orion XS, the Blue Smart IP22, the Smart IP43 and the Sun Inverter.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eCan one sensor feed more than one charger?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eYes. One Smart Battery Sense can feed several chargers at once - a solar controller, a DC-DC charger and a mains charger can all listen to the same broadcast on the network. The limit is one sense source per network, not one charger.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eDo I need a fuse?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eYes, and it is supplied. A T1A 250V inline fuse is required in the positive lead. It comes in the box along with the pre-crimped eyelets.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eHow far can it be from the charger?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eThis is the long range version, rated up to 10 metres. Note that the sensor's own cable is 45 cm, so the unit itself has to sit right at the battery - the 10 metres is the wireless link to the charger, not the wiring.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch4 itemprop=\"name\"\u003eI have a Cerbo-style GX system. Do I still need this?\u003c\/h4\u003e\n\u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\u003cdiv itemprop=\"text\"\u003e\u003cp\u003eIn a system already controlled by a Color Control GX or a Venus GX, the Smart Battery Sense is neither needed nor allowed. Those systems handle battery sensing themselves.\u003c\/p\u003e\u003c\/div\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eShipping and support\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDispatched from our \u003cstrong\u003eQueensland\u003c\/strong\u003e warehouse, with tracking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Victron stock\u003c\/strong\u003e, backed by the full \u003cstrong\u003e5 year warranty\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eAustralian owned and operated. Questions before you buy? Call us on \u003cstrong\u003e07 5211 0841\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIt pairs directly with a \u003ca href=\"\/products\/victron-smartsolar-mppt-100-15-bluetooth-scc110015060r\"\u003eSmartSolar MPPT 100\/15\u003c\/a\u003e, a \u003ca href=\"\/products\/victron-100-20-mppt-smartsolar\"\u003eSmartSolar MPPT 100\/20\u003c\/a\u003e or a \u003ca href=\"\/products\/victron-smartsolar-mppt-100-30-solar-charge-controller\"\u003eSmartSolar MPPT 100\/30\u003c\/a\u003e, and the monitors, chargers and accessories that complete the system are in the full \u003ca href=\"\/collections\/victron\"\u003eVictron range\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Victron","offers":[{"title":"Default Title","offer_id":46567018627268,"sku":"SBS050150200","price":53.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2517\/4562\/files\/VictronSmartBatterySense-02748.jpg?v=1792106526","url":"https:\/\/www.raingersupplyco.com.au\/products\/victron-smart-battery-sense-sbs050150200","provider":"Rainger Supply Co","version":"1.0","type":"link"}