The Revo-X 1.45 is built for people who actually tour Australia — beach trips, high country weekends, desert runs, and coastal camps. It’s a quick setup, hard-shell tent designed to be comfortable in heat, tough in weather, and simple to live with.

• Fast setup (gas struts + simple close system)
• More internal headroom (X-Frame and rear fold design = ~50% more room)
• Integrated 295W solar (clean, internally wired)
• Comfort upgrades (100mm dual-density mattress + fans + lighting)

Most couples fit comfortably. It’s ideal for 2 adults, and can suit an adult + child depending on size and sleeping preference. Mattress size is 1270mm × 1970mm.

Typical setup is under 60 seconds once you’ve done it a couple times. Pack down is also quick thanks to the single strap close system and tidy internal layout.

Yes — the Revo-X is designed to store light bedding inside when closed (and typically 2 thin pillows). For best sealing and easiest latch-up, keep it to light blankets/doonas rather than bulky winter gear.

The Revo-X 1.45 suits most touring setups including:

• Touring wagons (LandCruiser / Patrol / Prado / Everest / Ranger etc.)
• Alloy canopies or High Tub Racks / Tradie Racks
• Camper trailers
• Jet ski or motorbike trailers (for basecamp style trips)

If you’re unsure, email us photos of your rack/canopy and we’ll guide you.

The Revo-X works with most platform racks and load bar systems (provided your setup meets roof-load requirements).

Common brands:

• Rhino-Rack
• ARB Base Rack
• Front Runner
• Yakima
• Rola Titan
• Many alloy canopy bar systems

Some rack brands may require additional hardware or specific mounting plates. If you have questions, we’ll sort it.

In many cases, yes — but canopy load ratings vary wildly. You must confirm:

• Static load rating (parked camping load)
• Dynamic load rating (driving load)
• Mounting points and reinforcement

If your canopy brand provides a roof-load certificate/spec sheet, send it through and we’ll advise.

Yes — RTTs on trailers are a great way to keep weight off the vehicle roof, and they’re perfect for basecamp weekends. Just ensure the trailer frame and mounts are strong enough and the tent clears your tailgate/awnings.

• Dynamic load = what your roof/rack can carry while driving (bumps, braking, cornering, corrugations).
• Static load = what it can hold when parked (you sleeping inside).

Static is usually higher than dynamic, but you must follow your manufacturer’s limits.

Tent: 98kg
Solar + Rack: 22.7kg
Total (approx): 120.7kg

This does not include mounting hardware, accessories, recovery boards, light bars, etc.

• Mounting hardware & bars/platform
• Recovery boards + mounts
• Light bars / awnings / accessories
• Bedding stored inside the tent

If you’re close to a roof rating limit, moving accessories off the roof can make the difference.

Check the following three things (and always follow the lowest rating):

1. Vehicle roof rating (in your owner’s manual)
2. Rack system rating (bars/platform + legs)
3. Canopy rating (if fitted)

If you email us your setup details, we’ll help you sanity-check it before purchase.

No. Pickup is available from Rainger HQ (Baringa, Sunshine Coast), but we do not allow installs onsite or in the carpark for non-install buyers.

Want a local fit? Speak to your local 4WD store — we support wholesale installs Australia-wide.

Most setups use two quality load bars minimum. For extra stability and touring confidence

Many customers fit it themselves with basic mechanical confidence — but due to weight, you’ll want 2–4 people to lift safely.

• Measure bar spacing first
• Protect roof paint and edges
• Torque hardware correctly
• Apply lubricant/ Anti galling paste to stainless fastners
• Re-check fasteners after your first drive

Some rack systems (platforms or certain bar profiles) may require additional mounting plates or hardware. We can advise what you need for your rack.

The X-Frame design creates a higher internal roofline which equals:

• More headroom (great for tall campers)
• More usable internal space (changing clothes, sitting up, gear at your feet)
• Better airflow and comfort

The Revo-X rear extension increases usable internal length and space — quickly locked at the head-end. It’s built for comfort without over-complication.

Yes — the Revo-X includes a 2.3m telescopic ladder with angled steps and wide footing for better stability.

Yes — the Revo-X uses a simple single-strap close system Simple 2 pole awning fly plus durable latches for secure sealing. The goal is quick pack down that doesn’t feel like wrestling a sail in the wind.

The Revo-X canvas is built for real weather:

• 320GSM ripstop canvas
• PU 5,000mm waterproof rating
• UV +50 rating
• Hard-shell aluminium body with guarded sealing

Like all canvas products, performance depends on correct setup, good airflow, and reasonable use in severe conditions.

The hard-shell profile and robust structure make it more stable than soft-cover tents in many conditions. In strong winds:

• Park nose into wind where possible
• Use sheltered campsites (tree line / dunes / leeward side)
• Close awnings if gusts build

It gives fast coverage at the rear without interfering with 270° side awnings. Great for:

• Light rain cover
• Boot/shoe zone
• Quick shade at the ladder

Yes — all rooftop tents can all get condensation at times. It’s not a “fault”, it’s physics: warm breath + cool air = moisture.

• Crack open windows at head and foot ends for airflow
• Use the included 15mm anti-condensation mat
• Run the included USB fans on low speed
• Avoid drying wet clothes inside the tent overnight

The Revo-X is designed with ventilation windows + fans to keep airflow moving. Featuring 5 windows.

If you pack up damp (it happens) Zip up all windows before closing, open the tent again at home or the next destination as soon as possible and let it fully dry. This prevents any chance of mould and odour ocurring overtime with no airflow and keeps the canvas in top shape. Some campers doing " The lap" in a roof top tent will carry a small tarp to cover their mattress and bedding before packing away damp. Isolating their bedding from any moisture soaking in."

No messy external cables flapping around your rack. The Revo-X solar is internally routed for a cleaner, safer touring setup.

The Revo-X includes Dual Anderson Plugs:

• Grey: 12V input
• Red: Solar output
• Rear AUX port for additional power options

• 2 × cigarette sockets
• 2x USB-A
• 2x USB-C QC (fast charge compatible)
• 2x Voltage display

Yes — the Revo-X includes 2 slimline USB rechargeable fans with a magnetic base, so you can move airflow exactly where you want it.

For regulated charging into a battery system, we recommend a quality solar regulator. We stock the Victron SmartSolar 100/20 (sold separately).

If you want help wiring it into your canopy / drawer system, email us your setup and we’ll guide you.

The Revo-X includes a 100mm dual-density foam mattress with an eggshell comfort top. It’s built to sleep properly — not “survive the night”. Inspired but tweaked to be even better from our Legendary 100mm Mattress design offered across 1000s of our RT swags worldwide. The main advantage (You dont have to roll it up like a swag)

You could in theory, But the 100mm Mattress is a market leader in the scene, Offering an unmatched level of comfort compared to ALL other brands, We have made 1000's of mattresses since our companies inception in 2018, We perfected the 100mm mattress and became well known in the scene for our Swags. We have tweaked this for the Roof Top Tent. Providing a massive jump forward on research and comfort levels for RTT's

Yes — the X-Frame design helps create more usable internal height, and the layout is designed to feel less “coffin-like” than typical low profile RTTs.

Yes — many customers run a 270° awning alongside the Revo-X on our own REVO X Long 9 Way Adjustable Brackets. The 2 pole rear fly awning can be fitted with a Riser Kit for the back of the tent to clear 270 Awnings.

• Quick Release Shower Tent Mounts
• Recovery Board Mount Kits (Maxtrax, TRED)
• Victron SmartSolar 100/20 Regulator
• 8pk Tent Track Accessory Mounting Hardware Kit
• 3rd Roof Load Bar (40mm extrusion)
• Rainger 270° Awning Brackets (height adjustable)
• Narva Ultima 48” Light Bar Kits (Spread or Combo)

• Brush off dry dirt first (soft brush)
• Use mild soap + water (no harsh chemicals)
• Rinse thoroughly
• Dry fully before closing (best practice)

The #1 rule: don’t store it wet long-term. If you pack up wet, open it again ASAP at home and dry it properly.

Good airflow + quick drying habits = clean canvas for years.

Yes — it’s a touring product. We recommend re-checking fasteners:

• After the first drive
• After corrugations / beach runs
• Before big trips

Pickup: Rainger HQ, Baringa QLD (Sunshine Coast).

Or view our Contact Us page for the latest list of dealers: https://www.raingersupplyco.com.au/pages/contact-us

No onsite installs permitted for non-install buyers.

Flat rate shipping to QLD, NSW, VIC, ACT is $350 (Mainfreight depot pickup).

Remote regions / WA / NT / TAS / SA: email us for a quote.

QLD: Larapinta, Narangba, Townsville, Mackay

NSW + ACT: Sydney, Newcastle, Albury, Kembla, Canberra, Dubbo

VIC: Epping, Ballarat, Dandenong, Geelong, Bendigo

Pickup is required within 14 days. After that, storage fees may apply and could be passed on.

Yes — this is often the best option. We support installs Australia-wide through local stores. Ask your chosen 4WD shop and we can coordinate supply.

The Revo-X Rooftop Tent includes a 2 year manufacturer warranty from the date of purchase.

If your item has a manufacturing fault, we will assess and decide whether to repair, replace, or provide a reasonable solution.

• Incorrect installation or misuse
• Modifications or tampering
• Transit damage or general wear and tear moving the tent
• Condensation, mould, or rust from poor maintenance
• Punctures, weather damage, UV degradation, or excessive exposure to high winds
• Forceful use (example: zippers broken due to excess force)

Routine care and correct use is your responsibility. Warranty covers genuine manufacturing defects.

Email support@raingersupplyco.com.au with:

• Order number
• Photos / videos of the issue
• Short description of what happened

We’ll respond with the next steps as quickly as possible.