Meet the new benchmark in off-grid power: the Enerdrive B-TEC ULTRA 200Ah 12V LiFePO4 (Gen3). Built to survive Aussie conditions, this IP67-rated battery is fully dust-tight and waterproof (submersible to 1 m for 30 minutes), so you can mount it externally with confidence on 4x4s, caravans and trailers.
Serious output, rock-solid safety
• 200A continuous discharge with 800A peak (5 sec) for hard-hitting loads like inverters and induction cooktops.
• >6,000 charge cycles at 80% DoD for long service life.
• Full IEC 62619 certification (cell + completed pack) for proven electrical, mechanical and thermal safety.
Cold-weather ready + smart control
• Integrated cell heater for charging protection in low temps.
• On/Off isolation switch and status LEDs (SOC shown in 25% steps).
• Enerdrive B-TEC Bluetooth app (iOS/Android) for live SOC, volts/amps, temps, cell balance and alarms.
• CAN/RS-485 coms (M12-6P) for advanced monitoring/integration.
Scalable systems, easy install
• Series/parallel ready: up to 4 in series and 4 in parallel.
• Includes battery tray and straps for fast, clean mounting.
• M8 terminals (8–10 N·m torque).
What’s in the box
• Enerdrive B-TEC ULTRA 12V 200Ah LiFePO4 battery (Gen3)
• Mounting tray & securing straps
• Owner’s manual
Key specifications
• Nominal voltage: 12.8 V
• Capacity: 200 Ah (2560 Wh)
• Continuous discharge: 200 A @ 25 °C
• Peak discharge: 800 A / 5 s
• Nominal charge current: 100 A (max 200 A @ 25 °C)
• Charge voltage: 14.2–14.6 V (float 13.5–13.6 V)
• Operating temp (charge/discharge): –20 °C to +60 °C
• IP rating: IP67 (dust-tight & waterproof)
• Dimensions: 485 (L) x 172 (W) x 232.5 (H) mm
• Weight: 23.0 kg
• Warranty: 5 years
Why buy from us
• Authorised Enerdrive dealer – fresh Australian stock, full tax invoice & warranty support
• Brutally honest product advice from real 12V installers
• Fast dispatch Australia-wide, pickup options available
• Price-match on genuine like-for-like, bundle deals welcome
• Pre- and post-sale tech support to get your setup dialled
