Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210
Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210
Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210
Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210
Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210

Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210

SCC115035210

Regular price $364.50 Sale price
$232.95
Save 36%
/
Price includes GST Shipping calculated at checkout.

  • Shipping Available
  • Low stock - order soon
  • Open for backorder - secure yours


Product Description

The Victron SmartSolar MPPT 150/35 is a 35A maximum power point tracking solar charge controller for 12V, 24V and 48V systems, with a 150V PV input ceiling that lets you wire panels in series. It tracks the array's maximum power point continuously, converts the surplus voltage into charge current, and runs a multi-stage adaptive charge algorithm you can override entirely. Peak efficiency is 98 percent. Bluetooth is built in, so it sets up from VictronConnect on your phone.

This is the model you step up to when the array outgrows the 100V family or when the wiring makes more sense in series. Big canopy and roof arrays, expedition vehicles, cabins, sheds and small off-grid installations. It handles 48V systems, which none of the 100V models in this range do.

Critical: there is no physical load output on this model

Read this before you buy, because it is the thing buyers are most annoyed to discover afterwards.

The 150/35 has a virtual load output only. There are no load terminals. You cannot wire lights or a fridge to the controller and have it power them. What the virtual load output actually does is switch an external relay - the controller decides when the load should be dropped and signals accordingly, and the relay does the switching.

To use it at all you need a VE.Direct TX cable, sold separately, plus a suitable relay. That is the whole picture, and it is the same arrangement on the 100/30 and 100/50. If you want load terminals you can wire straight into, you want a smaller controller - the 75/10 or 75/15 have real load outputs rated at 15A continuous.

For most builds at this size this is a non-issue, because a system big enough to justify a 150/35 usually has proper distribution and low voltage protection downstream anyway. But go in knowing it.

How much solar can you run on a 150/35?

Two numbers govern it, and on this model the voltage number is the reason to buy it.

Panel wattage: 500W at 12V, 1000W at 24V, or 2000W at 48V. That is the nominal PV power the controller converts. Note how sharply the usable array grows with battery voltage - if you are anywhere near the top of the 12V figure, a 24V or 48V bank makes far better use of the same controller.

Array open circuit voltage: maximum PV open circuit voltage is 150V, and maximum PV short circuit current is 40A. The 150V ceiling is the point of this model. It gives you room to wire panels in series, which raises string voltage and lets you run smaller cable over a long roof-to-battery run with less voltage drop. Series is also what gets a large array within the controller's current limit.

The catch with series is cold weather. Open circuit voltage climbs as panel temperature falls, so a string that reads comfortably under 150V in summer can exceed it on a cold morning - and exceeding it is how controllers die. Take the Voc figure printed on the panel label, multiply by the number of panels in the string, and leave real headroom for the coldest morning the vehicle or building will ever see. If the sum is close, drop a panel out of the string.

The bit no one explains: VE.Smart Networking

A Smart Battery Sense, SmartShunt or BMV-712 measures voltage and temperature at the battery terminals and broadcasts them over Bluetooth. The 150/35 listens and sets its charge voltage from that reading rather than from its own terminals.

It matters more the bigger the system gets. The controller sits at the end of a cable, and at 35A that cable drops real voltage. The controller reads high, decides the battery is fuller than it is, and tapers early - every cycle. Feed it a true battery-side reading and the bank actually reaches full.

Synchronised charging is supported too. Run more than one SmartSolar MPPT - a roof array on one and a second array or a portable on another, which is common at this size - and over the same VE.Smart network they move through bulk, absorption and float together instead of each running its own private program. A network takes up to 10 devices, but only one sense source is allowed. One sensor, many chargers.

Key features

  • 150V maximum PV open circuit voltage - room to wire panels in series and run smaller cable over a long roof run
  • 35A maximum charge current across 12V, 24V and 48V systems
  • Ultra fast maximum power point tracking - noticeably better in changeable cloud
  • Peak efficiency of 98 percent
  • Multi-stage adaptive charge algorithm, or fully user defined if your battery has its own numbers
  • Equalisation is disabled by default - there for flooded lead acid, off unless you enable it
  • Bluetooth built in - configure, monitor and update firmware from VictronConnect
  • VE.Direct port for a wired connection to a GX device or a PC
  • VE.Smart Networking - battery-side voltage and temperature sense, plus synchronised charging with other SmartSolar controllers
  • Very low self consumption - 20mA at 12V, 15mA at 24V, 10mA at 48V
  • Virtual load output - switches an external relay, and needs a VE.Direct TX cable, sold separately
  • 16mm2 (AWG6) power terminals - sized for the current this thing actually moves

Mounting it - read this before you pick a spot

This is an indoor unit. Protection category is IP43 for the electronics and IP22 for the connection area. It is not sealed and it is not waterproof. Do not mount it in an engine bay, under a tray, in a wheel arch, or anywhere exposed to rain, road spray or dust. A dry, ventilated interior space is what it is designed for.

  • Mount it vertically, terminals facing downwards. Not flat, not on its side.
  • Mount it on a non-flammable substrate. At 35A the heatsink gets hot.
  • Leave clear air above and below the unit. This one relies on convection more than the small models do - box it in and you will lose output on hot days.
  • Mount it within 3 metres of the battery, but never directly above it. Close, for voltage drop. Not above, because batteries vent.
  • Do not mount it in a user-accessible area. Live terminals at meaningful current.
  • Power terminals accept 16mm2 (AWG6) cable. Size the run for length and current, not just to fill the lug.
  • Battery supply fuse: minimum 40A, maximum 45A. Fit it on the battery positive, as close to the battery as practical. This is not optional.
  • Check battery polarity twice. Reverse battery polarity blows an internal fuse that is not practically user-replaceable.
  • The WireBox-M terminal cover fits this model if you want the connection area shrouded. Sold separately.

Connect the battery first, then the PV. Disconnect in the reverse order. Full rated output is only available up to 40C ambient and up to 2000m altitude - above either, the controller derates itself to protect the electronics.

Full specifications

  • SKU: SCC115035210
  • Battery voltage: 12V, 24V or 48V
  • Maximum battery charge current: 35A
  • Nominal PV power at 12V: 500W
  • Nominal PV power at 24V: 1000W
  • Nominal PV power at 48V: 2000W
  • Maximum PV open circuit voltage: 150V
  • Maximum PV short circuit current: 40A
  • Peak efficiency: 98 percent
  • Self consumption at 12V: 20mA
  • Self consumption at 24V: 15mA
  • Self consumption at 48V: 10mA
  • Load output: virtual only, no load terminals, requires a VE.Direct TX cable sold separately
  • Charge algorithm: multi-stage adaptive, or user defined
  • Equalisation: disabled by default
  • Battery supply fuse: 40A minimum, 45A maximum
  • Data communication: VE.Direct port and Bluetooth
  • Operating temperature: -30C to +60C, full rated output up to 40C
  • Maximum altitude: 5000m, full rated output up to 2000m
  • Protection category: IP43 electronics, IP22 connection area
  • Power terminals: 16mm2 / AWG6
  • Dimensions: 130 x 186 x 70 mm
  • Weight: 1.25 kg
  • Colour: blue, RAL 5012
  • Warranty: 5 years

Frequently Asked Questions

Does the 150/35 have a load output I can wire a fridge to?

No. There are no load terminals on this model. It has a virtual load output, which switches an external relay rather than powering anything through the controller. To use it you need a VE.Direct TX cable, sold separately, and a suitable relay. If you want real load terminals, the SmartSolar 75/10 and 75/15 have a physical load output rated at 15A continuous.

How much solar can I run on a 150/35?

500W at 12V, 1000W at 24V, or 2000W at 48V. The higher your battery voltage, the more array the same controller will handle. The other limit is array open circuit voltage, which must stay under 150V.

Can I wire my panels in series?

Yes, and that is the main reason to choose this model. The 150V PV input ceiling gives you room to put panels in series, which raises string voltage and cuts voltage drop over a long cable run. Watch the cold weather though - open circuit voltage rises as panels get cold. Take the Voc figure from the panel label, multiply by the number of panels in the string, and leave headroom for the coldest morning the system will see. Exceeding 150V will destroy the controller.

What fuse do I need on the battery side?

Minimum 40A, maximum 45A, fitted on the battery positive as close to the battery as practical. The power terminals take 16mm2 (AWG6) cable, and the run should be sized for its length and current, not just to fill the terminal.

Is it weatherproof? Can it go in an engine bay?

No. Protection category is IP43 for the electronics and IP22 for the connection area. That is an indoor rating. It must not be mounted in an engine bay or anywhere exposed to rain, road spray or dust. Mount it vertically with the terminals facing downwards, on a non-flammable substrate, with clear air above and below.

Will it run a 48V battery bank?

Yes. The 150/35 supports 12V, 24V and 48V, and at 48V it will handle up to 2000W of panel. The charge algorithm is multi-stage adaptive or fully user defined, so lithium banks with specific voltage requirements are straightforward. Equalisation is disabled by default, which is what you want on lithium.

The panels are in the sun but the controller shows nothing. Is it faulty?

Probably not. PV voltage has to exceed battery voltage plus 5V for the controller to start, then stay above battery voltage plus 1V to keep running. In weak light the array never gets there, so the controller sits idle and reports nothing. That is normal, not a fault.

Shipping and support

  • Dispatched from our Queensland warehouse, with tracking
  • Genuine Victron stock, backed by the full 5 year warranty
  • Australian owned and operated. Questions before you buy? Call us on 07 5211 0841

If your array fits under 100V, the SmartSolar MPPT 100/15, 100/20, 100/30 and 100/50 cover 12V and 24V systems, and the 100/50 carries more charge current than this model. For more current at 150V, see the SmartSolar MPPT 150/45 and 150/60-Tr. For a small build that needs real load terminals, look at the SmartSolar 75/10 or 75/15. The full range is in our Victron collection.

Victron - SmartSolar MPPT 150/35 Solar Charge Controller (150V max PV, 35A, Bluetooth) - SCC115035210

Built By Adventurers

We've always believed in leaving no stone left unturned, Our products are no different


Recently viewed