Ute with open Rainger Revo-X 1.3 roof top tent at a bush campsite under the Rainger Duo 6ARM 270 awning in Desert Tan, LEDs lit
Desert Tan Rainger Revo-X 1.3 roof top tent open with solar panel lid raised on a dual-cab ute canopy at the beach
Rear three-quarter view of the Rainger Revo-X 1.3 roof top tent in Desert Tan open on a canopy ute on wet beach sand
Aerial view of a dual-cab ute with roof top tent beside water, Rainger Duo 6ARM 270 awning open in Desert Tan
Rainger Duo 6ARM awning in Desert Tan open beside a roof top tent with solar lid on a 4WD by a lake
White 4WD wagon under the Rainger Duo 6ARM awning in Desert Tan with LEDs lit
Side wall fully open from inside the Rainger Revo-X 1.3 roof top tent to the beach and sun on the horizon
Rainger Extended 9 Way Adjustable awning brackets for the Revo-X roof top tent
Rainger Extended 9 Way awning bracket fitted to the Revo-X tent shell track
Rainger Revo-X Awning Riser Kit with short spring poles

Revo-X 1.3 Tent + Duo 6ARM Awning + 9 Way Brackets Bundle - Desert Tan

BUNDLE-REVOX130-DUO6-9WAY-DT

Regular price $5,728.98 Sale price
$5,027.98
Save 12%
/
Price includes GST Shipping calculated at checkout.
  • Roof top tent freight is a fixed price by area, shown at checkout.

  • Low stock - order soon
  • Open for backorder - secure yours

Secure your bundle - we'll get your freight right

  1. Add the bundle to your cart. In the order notes, put your suburb or your best depot.
  2. At checkout, choose Pickup - Rainger HQ (not delivery).
  3. Choose Bank Deposit as payment. Your order is placed with no payment and no freight charged yet.
  4. We'll contact you to get your freight right, update your total and send you an updated invoice.

Why? Bundle freight is hard for the website to price. We pack bundles more efficiently and quote your freight in-house.


Product Description

The complete Revo-X 1.3 setup in Desert Tan - tent, 6-arm awning and the brackets that join them, in one order. Save $701 on RRP: the tent is $3,599 (RRP $3,999) and the Duo 6ARM awning is $1,199 (RRP $1,499).

Plus a Revo-X Awning Riser Kit ($39.99), packed in at no charge. It raises the tent's awning fly spring poles by 100mm so the awning arms clear the tent.

What is in the bundle:

Why these go together: the Revo-X, the Duo 6ARM and the 9 Way brackets are designed as one system. The brackets mount to the Revo-X shell tracks and clear the gas strut, and the awning's D-Zip gives you access up to the tent from underneath.

  • Tent: Revo-X 1.3 hardshell roof top tent with integrated 295W solar (regulator required, sold separately)
  • Awning: 6 arms (4 rear-folding + 2 forward-folding), 280GSM blackout ripstop canvas, LED lighting on 5 arms, 5 legs, 2 ratchet ropes, D-Zip roof access
  • Brackets: 3mm 2-piece stainless steel, 9-way adjustment, 95mm height adjustment up or down, mounts with up to 7 T-slot channel nuts
  • Riser Kit: pair of mounting brackets, hardware kit, spring pole bases and short spring poles

Full specs, setup steps and FAQs are on each product page - follow the links above.

Shipping and pickup: the tent and awning ship together on one pallet to a business address with a forklift, or a depot near you. Tents can't go to a home address. $0 pickup from Baringa, QLD, Monday to Friday, 9am-4pm. See Shipping and Delivery.

Afterpay and Zip available at checkout.

Production-spec Rainger Revo-X hardshell roof top tent fully open at camp — X-Frame elevation and rear fold
A Hardshell Built Properly

Built to do more than just
look good parked.

100mm Dual-DensityRevo-X interior mattress with bedding — 100mm dual-density foam
Build · Sleep System

A real sleep system —
not just a mattress.

The Revo-X uses the same mattress philosophy developed over seven years and thousands of swags. 100mm of dual-density foam with an eggshell top profile that distributes body pressure, improves airflow across the sleeping surface, and reduces the harsh feel of sleeping above an aluminium shell floor.

A roof top tent mattress has a different job to a swag mattress — it sits over a solid aluminium shell that can hold cold or radiate heat. The foam has to support comfort and act as an insulation layer between your body and the shell.

  • 100mm dual-density foam with eggshell comfort layer
  • 1130 × 1970mm sleeping surface
  • 15mm anti-condensation mat underneath — breaks the moisture cycle
  • Bedding stores inside when closed — doona, pillows, sheets pack in with the tent
In Real Rain

Water sheets off.
The seal stays dry.

Build · Sealing, At The Corners

Corners are where seals fail. Ours are die-cast aluminium.

Sealing a straight run is easy. The corner is where most hardshells quietly give up — and it's the first place water finds its way in.

Die-cast aluminium corner of the Revo-X bottom shell

Along the sides it's simple: a continuous extrusion and an unbroken seal channel. The corner is the hard part — and most hardshells hand it to a moulded plastic cap that goes brittle, loses clamping pressure, and lets water track in where you won't see it until the bedding's wet.

The Revo-X doesn't cut that corner. We join the bottom-shell extrusions with a die-cast aluminium corner that carries the raised seal edge unbroken around the bend, then guard it behind the top-shell lip — the same hidden seal system that runs the entire perimeter. One continuous sealing surface, corner included.

Six numbers that
separate a Revo-X from everything else.

Headline specs are the easy part — what matters is how they work together once the canvas is open.

+30%
X-Frame Elevation
More usable internal volume than a conventional hardshell of the same footprint.
+20%
Rear Fold Layout
Additional length and a rain-shed path away from the sleeping end of the tent.
100mm
Dual-Density Mattress
Eggshell profile over dual-density foam. 15mm anti-con mat underneath.
295W
Integrated Solar
Glass-framed monocrystalline PERC half-cell panel on a slimline rack.
5
Ventilation Openings
True crossflow for any wind direction. Most hardshells give you three.
320GSM
Ripstop Canvas
PU 10,000mm hydrostatic head. UV+50. SGS tested. PU-backed internal walls.
Build · Canvas & Materials

SGS tested. Independently verified.

We publish numbers competitors won't. 320GSM ripstop, PU 10,000mm hydrostatic head, UV+50 rated, every seam sealed. Internal walls are PU-backed and vacuum heat-sealed — not just coated on the outside face. The fabric is certified free of harmful phthalates.

01 / 04
SGS Test · Water
95/100
Water repellency score under independent SGS testing — above the threshold most competitors won't publish.
02 / 04
SGS Test · UV
4.5/5
UV resistance grade under accelerated weathering. Pairs with the UV+50 fabric rating — verified.
03 / 04
Hydrostatic Head
10,000mm
PU-backed 320GSM ripstop canvas. Awning fly rates 5,000mm at 300GSM. Seam-sealed throughout.
04 / 04
Ripstop Grid
Stops tears
Reinforced grid stops tear propagation. If a thread fails, it stops at the next grid point — not across the panel.
320GSM ripstop canvas weave macro
320GSM Ripstop · PU Backed
Laser-cut latch closure
4× Laser-Cut Latches
100mm dual-density eggshell mattress detail
Eggshell Mattress · 100mm
Telescopic ladder with angled wide steps
2.3m Telescopic Ladder
Build · Airflow

Five openings.
True crossflow in a compact hardshell.

Ventilation is the biggest difference between a tent that's easy to live in and one that becomes damp and stuffy after a few nights. Most hardshells give you three openings. The Revo-X gives you five — and the rear canvas door zips from the bottom up.

01
Left full doorIndependent
02
Right full doorIndependent · Most common side access
03
Rear full doorZips bottom-up · Low-level crossflow at mattress height
04
Front foot-end panelPairs with rear for mattress-level airflow · Shell cover blocks most rain
05
Protected top roof ventStays open in rain · Sits under awning fly · Magnetic fan ready
Revo-X ventilation with magnetic USB rechargeable fan

We do not claim the Revo-X eliminates condensation. No tent can. Condensation is physics. What the Revo-X does is reduce it substantially through five independent openings, two included magnetic USB fans, a 15mm anti-condensation mat, and PU-backed wipeable internal walls. Any moisture that does form is easier to control, dry and clean.

Build · Insect Mesh

Mesh that stops a nick becoming a hole.

Standard flyscreen tears once and ladders into a hole. We went looking for mesh that won't — and built it into every door and window.

Close-up of the Revo-X anti-cut Nylon 66 multifilament insect mesh

Every opening runs anti-cut Nylon 66 multifilament mesh in a leno-lock weave. Each yarn is a bundle of fine filaments, so it flexes with the zip instead of snapping — and at every intersection the weave twists and locks. A nick stops dead at the next twist instead of laddering across the panel. It's ripstop logic, applied to mesh.

We've tested it hard. No flyscreen is genuinely knife-proof — but this is about as close as mesh gets, and it flat-out refuses to let a small snag turn into a 2am mosquito problem.

Power · 295W Integrated Solar

Solar that lives on the tent —
not bolted on after.

A full-black 72-cell monocrystalline PERC half-cell panel on a dedicated slimline rack with airflow underneath. Wired in from the factory. Plug-and-play Anderson connections. No loose cables, no aftermarket guesswork.

295W · Slimline RackRevo-X with 295W solar panel and slimline rack installed

The panel uses a half-cell configuration that reduces hot-spotting and improves output under partial shading — the kind of light you actually get parked under trees or shade-cloth at a free camp.

It sits on a dedicated slimline rack with a natural air gap underneath. Cooler cells mean more stable real-world output, and if the panel ever needs servicing it unbolts cleanly without turning the tent lid into the problem.

The 295W output is unregulated. You'll need an MPPT/PWM regulator or DCDC/BCDC charger with solar input. We stock the Victron 100/20 Smart Solar as a purpose-matched option. Talk to us before you order if you're unsure.

22.23%
Module Efficiency
72
Half-Cells · 6×12
19.31V
Vmp
15.28A
Imp
Approach 01

Semi-flexible stick-on

Bonded to the tent lid with no air gap. Holds heat. Reduces real-world output. Messy and expensive to replace once adhered.

— Compromised thermals · Hard to service
Approach 02

Integrated into the lid

Solar built into the structural shell. Looks clean in a brochure. Locks you out of upgrades and turns repairs into shell-level surgery.

— No upgrade path · Repair-hostile
Revo-X

Glass-framed on a slimline rack

Conventional glass-framed module on a dedicated rack with airflow underneath. Cooler cells, better output, serviceable. Unbolts cleanly. Future-proof.

— Premium thermals · Built to last
12V Power Hub · Mirrored Each Side

Wired for how you
actually camp.

The 12V hub is mirrored at both head ends — not buried at the foot end. Each side gives you a 12V cigarette socket, USB-A, USB-C QC, and a voltage display, plus three dimmable LED strips overhead. Dual Anderson plugs sit plug-and-play ready — grey for 12V in, red for solar out — with a dedicated heat-proof diesel heater port built in.

  • Hub mirrored each side: cig socket + USB-A + USB-C QC + voltage display
  • 3× dimmable LED strips overhead
  • Grey Anderson (12V in) · Red Anderson (solar out)
  • Dedicated heat-proof diesel heater port + AC hose compatible
12V Hub · Plug-and-PlayRevo-X 12V power hub with voltage display, USB-A, USB-C QC and cigarette sockets
Anderson plug wiring detail
Anderson Plugs · Pre-Wired
15mm anti-condensation mat
15mm Anti-Con Mat
295W solar panel top-down detail
295W Panel · 72 Half-Cells
Magnetic USB rechargeable fan
Magnetic USB Fans ×2
X-Frame · Rear FoldRevo-X side profile showing X-Frame elevation and Rear Fold extension
Build · Architecture

X-Frame + Rear Fold —
genuine room to live.

Most hardshell roof top tents open on a single hinge. The X-Frame uses a crossed-strut elevation system that lifts the shell higher at both the head and foot ends, creating real internal volume where campers actually feel it — sitting up, turning over, getting changed, spending more than one night under canvas.

The Rear Fold adds more than extra room. On many hardshells the head-end canvas folds inward and rain runs toward the sleeping end. The Revo-X changes that path — the rearward extension stops that panel acting like a moisture channel above your pillows, and creates a protected top roof vent that stays covered from rain.

  • +30% more usable internal room from X-Frame elevation
  • +20% more space from the Rear Fold layout
  • Genuine headroom and foot-end room for extended trips
  • Protected top roof vent under the integrated awning fly
Revo-X closed shell profile mounted on a Prado at a lake — slim packed dimensions
Packed Down · Slim Profile

Closed, it disappears.
Open, it transforms.

Trusted By

The people who do this for a living, run our gear.

Patriot Campers TRED Outdoors Lightforce Group Legendex Roam Offroad Enhanced Offroad
Rainger Supply Co founder outside the Baringa QLD headquarters
Built by Founders · Baringa QLD

When you call us,
you get us.

The Revo-X was not bought off a catalogue and rebadged. The mattress philosophy comes from seven years and thousands of swags. The canvas spec was driven by Australian touring failures we'd already seen. The solar layout was decided by which panels actually hold up on Australian roof racks — not which were cheapest to import.

After the sale, you reach the same people. Not a call centre. Not a chatbot. The people answering your questions are the same people who worked through the mattress, canvas, solar rack and fitment logic behind this tent.

"Build smarter products. Solve real-world problems. Keep improving the details that matter once you're actually out there using them."
The Rainger Ecosystem

Direct-to-tent awning brackets.
Freestanding, no poles. Built to fit.

The Revo-X is the centre of a system, not a one-off. A Rainger 270° awning mounts straight to the tent body on our direct-to-tent brackets — and runs fully freestanding off them, no poles. 3 T-slot channels, up to 7 bolts per bracket. Fit the tent to your vehicle and the rest is there, ready.

Rainger 270° awning mounted direct-to-tent on the Revo-X — outback touring setup
Awning · Direct-to-Tent

Rainger 270° awnings —
mounted straight to the tent.

In This Bundle Rainger direct-to-tent awning bracket — 3 T-slot channels, up to 7 bolts
Direct-to-tent awning bracket
UVP · Bracket System

Direct-to-Tent Awning Brackets

Purpose-built brackets that mount our Rainger 270° awnings directly to the Revo-X body. No spacers, no compromise on ventilation — cleaner profile, lower stack height, faster setup.

UVP · Freestanding

Freestanding Off the Brackets

Mounted on the brackets, the 270° awning is fully freestanding — no poles, no legs. The bracketry carries the load, so it deploys faster and the rig stays clean.

UVP · System Build

One Build. One Workshop. One Phone Number.

Tent, awning, brackets, lighting, recovery mounts, BCDC, solar regulator — all from one Australian builder. One conversation sorts your whole setup.

Build Your Setup →
Rainger Revo-X 1.45 vs 1.3 side-by-side size comparison
Sizing · 1.45 vs 1.3

Pick the footprint.
Keep the core spec.

The 1.45 is 150mm wider than the 1.3 across every external dimension. Same X-Frame elevation, same Rear Fold, same 295W solar, same 5-opening ventilation, same 100mm mattress philosophy.

This is the 1300mm model — suited to solo travellers, tight canopy setups, narrower roof racks, or anyone wanting the Revo-X build in a more compact footprint.

This tent · 1300 × 2150mm Revo-X 1.45 · 1450 × 2150mm
Technical Specifications

Every number. Installed. Honest.

We publish the total installed weight (~109.7kg) — tent + solar + rack + wiring — because that's how the tent is actually used on your vehicle. Most competitors quote the shell only and leave the rest to be added later.

Closed Bare Shell Dimensions1300 × 2150 × 175mm
Height with Rack & Solar215mm total
Total Height Incl. 25mm Mounting Rails230mm (outer shell & 3rd track overhang 10mm, reducing height)
Mounting Rail OrientationFront-to-back | 1800mm long | 600mm apart
Max Crossbar Span1600mm
Max Front Overhang800mm
ColoursDesert Tan (two-tone with black) | Midnight Black
Mattress1130 × 1970mm | 100mm dual-density eggshell foam
Tent Weight92kg (including mattress)
Solar + Rack Weight17.7kg (panel is 14kg)
Total Installed Weight~109.7kg all-in (tent + solar + rack + wiring)
Solar Panel295W full-black monocrystalline PERC | 72 half-cells | Glass-framed slimline
Solar OutputUnregulated | Vmp 19.31V | Imp 15.28A | Voc 24.30V
Tent Canvas320GSM ripstop | PU 10,000mm | UV+50 | Seam-sealed | PU-backed internal walls
Awning Canvas300GSM synthetic | PU 5,000mm | UV+50
MeshSuperfine anti-cut nylon — all windows and doors
Ventilation5 independent openings | True crossflow | Rain-protected top vent
Fans2× USB rechargeable | Internal lithium | Magnetic mount | Removable
Anti-Condensation Mat15mm black mesh
Ladder2.3m telescopic | Hook & pin lock | Angled wide steps
Closure4× laser-cut latches | 1-strap pull-down
Hardware316 marine grade stainless steel throughout
Gas StrutsStabilus German-engineered | Specced for shell weight | Stocked as spares
Shell SealHidden recessed | Alloy-guarded | 10mm overhang with outward flare
12V Power HubMirrored each side | Cig + USB-A + USB-C QC + Voltage display per side
Anderson PlugsGrey 12V in | Red solar out
Lighting3× dimmable LED strips
StorageOverhead tablet pocket | 4 side gear pockets
Heater PortHeat-proof diesel heater port | Zipper | AC hose compatible
Warranty2 years — manufacturing defects
Vehicle Compatibility

Fits more than you think. Confirm before you order.

The Revo-X mounts to touring vehicles, alloy ute canopies, load bar setups, camper trailers, and jet ski or motorbike trailers. Rhino Rack, ARB, and Front Runner systems may need additional hardware. Contact us before you order — we'll confirm compatibility with your specific setup before anything ships.

Touring VehiclesAlloy CanopiesLoad Bar SetupsCamper TrailersJet Ski / Moto Trailers
Shipping & Pickup

Roof top tent freight is a fixed price by area, shown at checkout.

Delivered to a business address with a forklift.

Tents can't go to a home address - choose a business address with a forklift, a depot near you, or pickup from Baringa HQ ($0).

Pickup from Baringa HQ is $0, Monday to Friday 9am-4pm.

Buying 2 or more tents? Message us for a combined freight quote - extra tents share the pallet, so it works out cheaper per tent.

No forklift at your end? Message us before ordering and we'll check what's possible at your address.

See the tent price table

View · In Person

Rainger HQ

Unit 3/55 Edison Crescent, Baringa, Sunshine Coast QLD
Open Mon–Fri · 9am–4pm

View · In Person

Roam Offroad

Gawler, Adelaide SA
Open hours · Walk in

View · In Person

Norweld

See the Revo-X 1.45 (near-identical tent) at Norweld — Newcastle NSW.

Frequently Asked

Questions worth answering honestly.

Does the Revo-X get condensation?

Every hardshell roof top tent does — it's physics, not a design fault. The real question is whether you wake up in a damp tent, and the Revo-X is engineered so you don't: five openings for genuine crossflow, two magnetic USB fans moving air overnight, and a 15mm anti-condensation mat plus a 100mm dual-density mattress that keeps you up off the cold alloy floor — a warmer sleeper puts less moisture into the air than one pressed against a cold base. PU-backed walls wipe dry instead of soaking moisture in, so anything that does form takes seconds to wipe down, not a morning spent drying out a tent.

How much does it weigh fully installed?

Approximately 109.7kg all-in — that includes the tent (92kg), the 295W solar panel, slimline rack, and internal wiring (17.7kg). We publish the total installed weight because many competitors only quote the shell weight without the components buyers usually add later.

Do I need a solar regulator?

Yes — the 295W panel output is unregulated. You will need either a standalone MPPT/PWM solar regulator or a DCDC/BCDC charger with solar input. Many popular units from Redarc, Projecta, Enerdrive, Victron and Renogy will suit. Contact us before ordering and we'll help confirm compatibility with your setup.

What vehicles does it fit?

The Revo-X mounts to touring vehicles, alloy ute canopies and load bar setups, camper trailers, and jet ski or motorbike trailers. Rhino Rack, ARB, and Front Runner systems may require additional mounting hardware. Contact us before you order and we'll confirm compatibility with your specific setup before anything ships.

Can I store bedding inside when it's closed?

Yes. The Revo-X stores your doona, light pillows, and sheets inside the shell between trips. One strap pulls the tent down and four laser-cut latches lock it shut, so pack-up stays quick.

What's the difference between the 1.45 and 1.3?

The 1.45 is 150mm wider across every external dimension. The core design is identical: X-Frame elevation, Rear Fold, integrated solar, ventilation system and mattress philosophy. The 1.45 suits couples on extended trips and families wanting genuine room to move; the 1.3 suits buyers wanting a tighter footprint without giving away the core spec.

Can I replace the canvas if it gets damaged?

Yes. The canvas body unzips from the top and rotates out via a bottom sail track system. If the canvas is ever damaged or reaches end of life, it can be replaced without buying a whole new tent.

Where can I see one in person before buying?

The Revo-X is available to view set up at Rainger HQ in Baringa, Sunshine Coast QLD (open Mon–Fri, 9am–4pm), at Roam Offroad in Gawler, Adelaide SA, and at Norweld in Newcastle, NSW. We also attend camping and 4WD shows through the year — contact us to find out where we'll be next.

Order, Reserve, or Talk Through Your Setup

Speak to the people
who built it.

A serious purchase deserves a direct conversation. Not a bot. Not a call centre. The same people who designed the mattress stack, sourced the canvas, and wired the solar are answering the phone. Mon–Fri 9am–4pm.


Recently viewed